Name: Big scissors lift power pack

The hydraulic power unit consists of two independent single-acting two-way oil can improve cylinder control valve, falling speed by a throttle valve adjustment, two independent set of two-way valve can be manually to ascend to the separate manual filling oil, cylinder oil with switch pressure gauge, can be turned on and off at any time the system pressure value, the system configuration blackout emergency oil return function, which can realize power failure two cylinder can be a separate manual speed down to ascend.

1.This power which can only work intermittently and repeatedly ,ie.,1minute on and 8 minute off .

2.Clean all the hydraulic parts concerned before mounting the power unit .

3.Viscosity of the hydeaulic oil shoud be 15~68cst,which should also be clean and free of impurities.ISO46 hydraulic oil is recommend.

4.This hydranlic power unit is suitable for horizontal installation.

5.Check the oil level in the tank after the initial running of the power unit .

6.Oil changing is required after the initial 100operation hours,afterwards once every 3000 hours.

7.wei are at your disposal to offer you the power units with your favorate power ,flow,pressure as well as the tank capacity.

Schematic diagram of oil circuit: